Venus for Men: Difference between revisions

Latest revision as of 07:24, 12 March 2026

The Venus for Men (aka the Venus 2000, or Venus) is a penis milking machine manufactured by Abco Research Associates (currently trading as Sybian Inc).

Mechanism of Operation

Gear motor driving diaphragm pump. Speed controlled.
Receiver with latex rubber liner inside an acrylic tube.

Components

The standard Venus kit comprises:

Power box
Air pressure remote ("Stroke Length")
Power and motor speed remote
Large (XXmm) tubing (for _receiver_)
Small (XXmm) tubing (for _air pressure remote_)
Natural Latex Liner
Solid acrylic tube with XXmm hose barb
Soft plastic end-cap matching receiver tube diameter with one or two one-way ball valve(s).

Optional

Receiver Assembly Tool
Stroke Sleeve

Attachments

Receiver

All about size/diameter/length (codes, etc)

Nipple Suckers

Models

Venus I ??
Venus II
Venus 2000 with external remote
Venus 2000 with integrated controls

Single and multi-voltage variants

Spare Parts

Bodine Motor

Liner Options

Natural Latex Liner
SeriousKit "Clear" Liner

   - Very smooth

3rd Party Receivers

Select SeriousKit SPTs via adapter

Hands-free Options

Goose neck
LBD Glide Plate

E-stim Options

FAQ

Can I use the NimbleStroker receiver with the Venus?

Yes you can, but do note that the NimbleStroker hose has a larger diameter than the Venus hose. Its inner diameter is 16mm (5/8 in), compared to the Venus's 10mm (3/8 in). So you will need a conversion valve to do this.

In addition, owing to the differences in total air volume within the closed system, the Venus may either not stroke enough or stroke too much that it constantly wants to pop off. Possible but not recommended as it doesn't feel particularly good. Video demo here.

Are there any 3rd party products that add functionality to the Venus?

MausTec has created a digital controller for the Venus called the Mercury 1000 (M1000), which replaces the stock speed/power and air control boxes.

The M1000 can control both the speed and stroke length using a single control box, and has a built in pressure sensor that can be used to automatically control the pressure in the system (coming soon).

The M1000 supports the MausTec Edge-o-Matic 3000 via an Accessory Jack, and has Bluetooth, WiFi, and Serial over USB connectivity. It uses a simple and familiar protocol, TS-code, which makes developing your own control applications and integrations relatively easy.

The M1000 is a brand new product and will see additional features in the near future added via firmware updates, such as programmable/random sessions, automatic pressure management, native buttplug.io supoort and more.

Check it out here.

Contributed by @Marduk

Does the Venus support 'auto-edging'?

Not with default hardware, but this can be accomplished with the MausTec M1000 and the MausTec Edge-o-Matic 3000.

The Edge-o-Matic 3000 connects to the M1000 controller via an accessory port, and can control stroke speed as well as halt the Venus when excessive pre-orgasm clenching is detected on the inflatable plug.